If The Appliance Is Defective; Unpacking And Connecting; Unpacking; Assembly - Dirt Devil Vision V1 Operating Manual

2 Unpacking and connecting

1.6 If the appliance is
defective
2 Unpacking and connecting

2.1 Unpacking

2.2 Assembly

2
1
3
1
2
26
„
Never operate a defective appliance or an appliance
with a defective cable. There is a considerable risk of injury.
„
Bring or send defective appliances to a specialist dealer
or to Royal
Address, ZPage 39, "Warranty".
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery ZPage 22, "An overview of your Vision
V1".
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
Fig.1
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. It could be switched on by accident.
1. Press the locking pin (Fig. 2/1) and push the handle
(Fig. 2/2) into the upper end of the telescopic tube
(Fig. 2/3).
Fig.2
2. Push the telescopic tube (Fig. 3/1) into the telescopic
tube mount (Fig. 3/2), until it audibly clicks into place.
WARNING:
Make sure that the telescopic tube and the handle are
securely positioned in the mount. If this is not the case
then there is a risk of injury.
Your brush vacuum cleaner is now ready to use.
Fig.3
£
Appliance Customer Services for repair.