Table of Contents
Advertisement
7. Equalization
The CMS60 ICT – 30 / CMS60 ICT - 4 is designed to need no equalization or correction to
overcome system limitations. As a result, it will only need equalization to compensate for
difficult acoustic environments.
Excess equalization can reduce system headroom, and introduce phase distortion resulting in
greater problems than it cures. If equalization is required then it should be applied gently and
smoothly. Violent equalisation will be detrimental to the overall sound quality. If the
loudspeakers were being used consistently at high levels it would be beneficial to introduce a
high-pass filter at 50Hz to protect the loudspeaker from any unnecessary subsonic
frequencies.
8. Dimensions
305mm
12"
Advertisement
Table of Contents
