Table of Contents
Advertisement
When the plug has been connected, close the wiring cover as shown in Figure 3d, below:
Place the wires in the recess in the cable clamp. Close the cable clamp as shown in Figure
3e and tighten the screw holding the clamp in order to secure the cables in place.
Figure 3d
Figure 3e
3.3 Installation
The CMS60 ICT – 30 / CMS60 ICT - 4 is supplied as a complete product, ready for
installation. An optional C Ring, Tile Bridge and Plaster Ring are available if required. The
CMS60 ICT – 30 / CMS60 ICT - 4 has been designed for ease of installation.
To install the speaker, connect the speaker as described in the section 3.2. The speaker has
4 tags (dogs) (Figure f), which hold the speaker in place. Ensure these tags (dogs) are flat against
the can before installing into the ceiling.
Tags for fastening speaker
Screws for tightening tags
Figure f.
Advertisement
Table of Contents
