Table of Contents
Advertisement
10. Technical Specifications
Frequency Response (1) +/-3 dB
Sensitivity 1W @ 1m (3)
Maximum SPL
Power Handling (2)
Impedance
Dispersion
Driver Complement
Crossover
Connectors
Safety Features
Enclosure
Finish
Weight (each)
Dimensions
Accessories (Optional)
Shipping Weight (Pair)
Shipping Dimensions (Pair)
NOTES:
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
A comprehensive range of measurements including off axis frequency response curves, octave & third
octave polar diagrams, beamwidth plots as well as Ease data can be downloaded from
http://www.tannoy.com/
Tannoy operates a policy of continuous research and development. The introduction of new materials or
manufacturing methods will always equal or exceed the published specifications, which Tannoy
reserves the right to alter without prior notice.Please verify the latest specifications when dealing with
critical applications.
THP 30
Low Impedance
Average
Programme
Baffle Diameter
Can Height
Cutout size
60Hz - 20kHz
89dB (anechoic)
92dB (half space)
104dB(average)
107dB(peak)
107dB(average)
110dB(peak)
60 watt
120 watt
Nominal: 4ohms (on low impedance setting)
See Beamwidth Plot
6.5" (165mm) full range ICT™ Point Source
7kHz inductively coupled
Removable locking connector with screw
input and output terminals.
Rear safety tie back ring located at rear top
of enclosure for attachment of a load bearing
safety bond.
12 litres, vented with removable steel back
can
Paintable white
4.3kg (9.46 lbs)
334mm (13⅛")
226mm (8⅞"), 243mm (9 9/16") incl. Tie
back ring
305mm (12")
C ring
Tile Bridge
Plaster ('mud') ring
9.8kg (21.56 lbs)
750mm x 330mm x 40mm
(29.53") x (13") x (15.75")
Advertisement
Table of Contents
