Tremolo Function - Rocktron CHAMELEON User Manual

The TREMOLO function is available only in configurations displaying "TREM" in the configuration title.
The Tremolo effect continuously varies the volume of the signal.
The PARAMETER SELECT control will allow you to access these TREMOLO parameters:
TREMOLO I/O
LOCATION
DEPTH
RATE
SHAPE
24
The TREMOLO IN/OUT parameter determines whether the Tremolo is active or by-
passed for the current preset.
The LOCATION parameter determines whether the Tremolo is located Pre-Reverb or
Post-Reverb. Most vintage amplifiers configured the Tremolo (or vibrato) Post-Reverb.
The DEPTH parameter determines the amount of modulation for the Tremolo signal.
Lower DEPTH settings produce more subtle tremolo effects, while higher settings will
result in a more extreme tremolo effect.
The RATE parameter determines the speed at which the tremolo signal modulates (or
increases and decreases in volume).
The SHAPE parameter determines the waveshape of the tremolo signal. Selecting a
different waveshape produces a different tremolo effect.