Program Changes - Rocktron CHAMELEON User Manual

Program Changes allow for different MIDI program numbers to be assigned to Chameleon preset numbers. For
example, MIDI program #58 can be mapped to Chameleon preset #34. Then, when program #58 is selected from a MIDI
transmitting device (such as a Rocktron All Access
The Program Changes Map table is shipped from Rocktron at a one-to-one correspondence (i.e. MIDI program #1 is
mapped to Chameleon preset #1, 2 to 2, 3 to 3, etc.).
Step 1
Step 2
ON - Execute MlDI program changes as received by a MIDI controller
MAP - Use mapping table when a program change is received
OFF - Do not execute MlDI program changes
Step 3
Step 4
80
To access MIDI Program Mapping, turn the FUNCTION SELECT control clockwise until the
Chameleon displays "PROGRAM CHANGES".
Turn the PARAMETER SELECT control one step clockwise to display the current Program Change
On/Map/Off status.
Program Changes status options
Turn the PARAMETER ADJUST control to select the desired Program Changes status setting.
Press the STORE button to save the status selection. "STORED" will flash briefly on the display.
®
foot controller), preset #34 will be recalled on the Chameleon.
3,7 4,8 2,5,6 1