Deleting A Local Configuration; Restoring Factory Settings - Aastra 6739i User Manual

Configuring the Aastra 6739i

Deleting a Local Configuration

The Aastra 6739i saves local settings (e.g. audio settings, newly programmed or
changed function keys) in a local configuration. Use the following procedure to
delete the local configuration and to restore the configuration that was configured
in the Web Configurator of the Aastra 800 / OpenCom 100 communications
system.
1. Press the options key
The Options list menu card appears.
2. Press the Advanced softkey.
The display shows Enter Administrator Password.
3. Enter the administrator password with the number keys (please refer to
Aastra 6739i Passwords on page 24). Confirm using the Enter softkey.
The Advanced menu card appears.
4. Press the Reset softkey.
The Reset menu card appears.
5. Press the Erase Local Cfg. softkey.
The Aastra 6739i starts and is quickly ready for operation once again.

Restoring Factory Settings

It is possible that you have been operating the Aastra 6739i with another commu-
nications system or with an Internet SIP provider. To operate the Aastra 6739i with
the Aastra 800 / OpenCom 100 communications system, you should restore
factory settings.
1. Establish an Ethernet connection to the Aastra 6739i by connecting it to the
Aastra 800 / OpenCom 100 communications system. The Aastra 6739i requires
a DHCP address to execute the restart.
2. Wait until the Aastra 6739i has started. Now press the options key
The Options list menu card appears.
3. Press the Advanced softkey.
The display shows Enter Administrator Password.
4. Enter the administrator password with the number keys (please refer to
Aastra 6739i Passwords on page 24). Confirm using the Enter softkey.
The Advanced menu card appears.
.
.
23