Set Phone To Factory Defaults/Erase Local Configuration - Aastra 5i Series Administrator's Manual

Sip ip phones
Table of Contents

Advertisement

Set Phone to Factory Defaults/Erase Local Configuration

You can set phones to their factory default setting or remove a local phone's
configuration using the IP Phone UI or the Aastra Web UI.
Setting Factory Defaults on the Phone
Factory default settings are the settings that reside on the phone after it has left the
factory. The factory default settings on the phone sets the factory defaults for all
of the settings in the aastra.cfg, <mac>.cfg, and local configuration. Performing
this action results in losing all user-modified settings.You can reset a phone to
factory defaults using the IP Phone UI or the Aastra Web UI.
Setting Factory Defaults Using the IP Phone UI
IP Phone UI
Step
Action
1
Press the Options key on the phone to enter the Options List.
2
Select Administrator Menu and enter your Administrator Password (default is 22222).
3
Select Factory Default.
4
For 9143i, 51i, 53i:
The "Restore Defaults?" prompt displays.
Press # to confirm.
For 9480i, 9480i CT, 55i/57i/57i CT:
The "Reset phone to factory defaults?" prompt displays.
Press Default to confirm.
41-001160-01, Rev 00, Releaes 2.3
Administrator Options
Administrator Level Options
3-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9143i9480i9480i ct55i57i57i ct ... Show all

Table of Contents