By Cursor Key; Deleting A Route; Other Settings In Route Menu - Standard Horizon CP180 Owner's Manual

Color gps chart plotters
Hide thumbs Also See for CP180:
Table of Contents

Advertisement

5. Move the ShuttlePoint knob to the highlight the desired Route and press [ENT].
6. On the Chart page a circle with a Flag is shown on the first leg of the Route and a navigation
line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the
Route.
9.6.1

By Cursor key

1. On the Chart page move the ShuttlePoint knob until the cursor reaches the starting point
of the Route.
2. Press [GOTO] to start following the Route.
3. Press [CLR] twice to revert to Home mode.
9.7

DELETING A ROUTE

To delete a Route follow the procedure below:
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
3. Move the ShuttlePoint knob to highlight DELETE and press [ENT] or move the
ShuttlePoint knob to the right.
4. A Warning message appears to confirm. Move the ShuttlePoint knob to highlight YES
and press [ENT]. The Route has been deleted.
An active Route (one that you are navigating to) cannot be deleted until you stop navigating to the
Route.
9.8

OTHER SETTINGS IN ROUTE MENU

You will notice the ROUTE menu has other selections.
SELECT
Choose an available Route to create or choose a stored Route to show and follow on the Chart page.
REVERSE
Reverses the Route, when chosen Starting point is at the end of the Route.
COLOR
Allows changing the color of the navigation lines between each leg in the Route.
REPORT
The Route Report menu is useful to show details of the Waypoints contained within the Route. This menu
also allows you to enter in your average speed and fuel consumption and calculate the approximate fuel
used when following the Route.
SEND
Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence.
RECEIVE
Receive the points from an external device (PC) capable of sending NMEA RTE sentence.
THICKNESS
Selection that allows the Route line to be easily seen; default selection is Thick.
GPS Chart Plotters
Figure 9.6.0a - GOTO ROUTE procedure (2)
WARNING
Page 75
R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp300Cp180iCp300i

Table of Contents