Battery Connections; Nmea Connections; Move The Shuttlepoint Knob To Highlight Port4 Input (Or Other Port The Ais Is) - Standard Horizon CP180 Owner's Manual

Color gps chart plotters
Hide thumbs Also See for CP180:
Table of Contents

Advertisement

VIDEO
Camera
CP300
Port2 Input and Output is used by the optional FF525 (or FF520). In the diagram above you will
notice Port2 Input and Output wires are shown in gray and not used.
Port4, and 5 Outputs are can be connected to NMEA devices capable of listening to NMEA0183
sentences.
Port4, and 5 Inputs can be connected to NMEA devices capable of outputting to NMEA0183
sentences.
The Input and Output baud rate for each Port is set using the Advanced
Setup>In/Out Connections menu. For example if Port1 is set for AIS 38400, the
Input Port operates at 38400 baud and the Output Port is disabled.
AIS Setup
The CP300 or CP300i has to be setup to be able to receive NMEA information from the AIS receiver.
1. Press [Menu], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT] or
move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight PORT4 INPUT (or other Port the AIS is
connected to) and press [ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob up/down to select AIS 38400 and press [ENT] or move the
ShuttlePoint knob to the right.
2.5

BATTERY CONNECTIONS

1. The GPS Chart Plotters are supplied with a fuse and holder. This fuse should be
installed into the Black wire to protect the NMEA Output/Input circuits from becoming
damaged.
2. Connect the Red and Black wires from the GPS Chart Plotter to a 12VDC source directly
as possible.
2.6

NMEA CONNECTIONS

The GPS Chart Plotter can be connected to external devices with NMEA and display
information, examples:
GPS Chart Plotters
SMART GPS
Antenna
Tee
Optional
Fish Finder
Transducer
NOTE
Red
No Connection
Black
No Connection
Green
NMEA Common
Blue
Port 4 Input
Brown
Port 4 Output
Gray
Port 5 Input
White
Port 5 Output
Yellow
No Connection
Red
Black
2A
Fuse
Green
NMEA Common
Blue
Port 1 Input
Brown
Port 1 Output
Gray
Port 2 Input
White
Port 2 Output
Yellow
Port 3 Output
R
AIS
Switch
-
+
Battery
10-35Vdc
VHF
PILOT
Page 23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp300Cp180iCp300i

Table of Contents