How To Show The Pictures Or Diagrams Of A Multimedia Object - Standard Horizon CP180 Owner's Manual

How to show the pictures or diagrams of a Multimedia Object

They are shown on the Chart page with the camera icon , see the figure below:
WAAS 3D
Figure 6.0.9a - Example of camera icon on CP300/CP300i
Move the cursor over the camera icon. You are get the quick info on the object and there
is the camera icon on the top bar of the window:
WAAS 3D
Figure 6.0.9b - Example of Quick Info on camera icon on CP300/CP300i
On the CP300/CP300i press [I ], or on the CP180/CP180i press [ENT] for 1 second,
MAGE
to display the image on the screen:
Figure 6.0.9c - Example of displayed image on CP300/CP300i
Otherwise on the CP300/CP300i press [E ], or on the CP180/CP180i press [ENT],
XPAND
to open the Full Info on the object. Note that on the Full Info, there is the small camera icon
on a corner of the square containing the object icon. To see the picture press [MENU] when
the object with a picture is highlighted.
Page 60 GPS Chart Plotters
R