Test Local Mode; Resume Normal Mode - Nortel 2002 User Manual

Test Local Mode

Use Test Local Mode to check local mode functionality (make and receive
telephone calls). This is useful when provisioning has changed for an
IP Phone on an MG 1000B Controller.
(Services)

Resume Normal Mode

Use the Resume Normal Mode command to return to Normal Mode after
testing survival functionality.
Note: If the Resume Normal Mode command is not performed after
testing, the telephone automatically returns to Normal Mode in ten
minutes.
(Services)
1. Press the Services
2. Press the Up/Down
scroll and highlight
3. Press the Select
resets and registers to the branch office).
1. Press the Services
2. Press the Up/Down
scroll and highlight
Mode.
Additional features
key.
navigation keys to
Test Local Mode.
soft key (the telephone
key.
navigation key to
Resume Normal
125