Nortel 2004 User Manual page 19

(Mute)
(Quit)
About the Nortel IP Phone 2004
Your key functionality is enabled or
Mute
disabled by your system administrator.
Contact your system administrator to
determine if your
If your key is enabled, press the
Mute
key to listen to the receiving party without
transmitting your voice. Press the
again to return to two-way conversation.
Note: If your
pressing the
hold. Press the
restore the active call or press the line
key to restore the active call. You cannot
retrieve this call from hold by pressing
the Hold key.
The key applies to handsfree,
Mute
handset,and headset microphones.
The Mute LED indicator, located on the
key, flashes to indicate that the microphone
is muted.
Press the key to end an active
Quit
application. Pressing the
affect the status of calls currently on your
telephone.
Context-sensitive soft keys
are located below the LCD display screen.
The LCD label above the key changes based
on the active feature.
Note: If a triangle appears before a soft
key label, the feature is active.
key is enabled.
Mute
key is not enabled,
Mute
key places the call on
Mute
key again to
Mute
key does not
Quit
(self-labeled)
Mute
key
Mute
Mute
19