Resetting To The Factory Default Settings - Axis Video Server User Manual

Axis video server - System options
56

Resetting to the factory default settings

To reset the Axis video server to the original default settings, go to the System Options >
Maintenance web page (described in Maintenance, on page 54) or use the control button
on the Axis video server, as described below:
Using the Control Button
Follow the instructions below to reset the Axis video server to the factory default settings
using the Control Button.
1. Switch off the Axis video
server by disconnecting
power.
2. Press and hold the Control
Button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control Button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the Axis video server has been reset.
6. Re-install the Axis video server, as described in the Installation Guide.
Status Indicator
Control Button