Resetting To The Factory Default Settings - Axis 242S User Manual

AXIS 241Q/S/QA/SA - System Options
46

Resetting to the Factory Default Settings

To reset the Video Server to the original default settings, go to the System Options >
Maintenance web page (described in Maintenance, on page 44) or use the control button
on the Video Server, as described below:
Using the Control Button
Follow the instructions below to reset the Video Server to the factory default settings using
the Control Button.
1. Switch off the Video Server
by disconnecting power.
2. Press and hold the Control
button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the Video Server has been reset.
6. Re-install the Video Server, as described in the Installation Guide.
Status Indicator
Control Button