Running Iv Module; Module List - Axis Video Server User Manual

Running IV module

This shows the IV module currently running in the AXIS 242S IV Video Server. Only one
IV module can run at any one time. The loaded module will also show one or more
function buttons. Exactly which buttons are displayed is module-dependent, with the
exception of the Stop button, which is always available.
• Stop - the module is disabled, no other is started.
• Edit parameters - opens a new window that provides access to all of the module's
available settings.
• Status - opens a new window showing statistics, results or other information,
depending on the IV module.

Module list

The IV module list shows the currently uploaded IV modules. The maximum number that
can reside in the AXIS 242S IV at any one time is only limited by the amount of flash
memory available.
To start an IV module from this list, select it and click the Start button. This will
automatically stop any other IV module currently running.
To remove a module, select it in the list and click the Remove button. The module does not
need to be stopped before being removed.
To see the available information for the module, select it in the list and click the About...
button.
Axis video server - Intelligent Video
35