Table of Contents
Advertisement
LIP-6812
NOTE: Calls can not be received unless the Line is registered to a Call Server. When not
registered, the Line button LED will blink red and orange.
2.2. Making a Call
You can make a call using on-hook or off-hook dialing.
To place a call:
1) Lift the handset, press
2) Dial the destination phone number; you may need to dial '#' at the end of the number.
3) When the called party answers, begin speaking (the LCD will display the elapsed call time).
To end the call,
1) Replace the handset, press
2.3. Putting a Call on Hold
You can place a call in a waiting state; the held party cannot hear you and you cannot hear the
held party. You can answer or place other calls while a call is on hold.
To place a call on Hold:
1) Press the
[Hold]
To retrieve a held call:
1) Press the blinking Line button, or press
NOTE: If multiple calls are on hold, a list of available calls will display. Use the
Softkeys to select the desired call, "Retrieve Call Idx. #", and press the
If you place a call on hold and return to idle, you may receive a Call Hold Ringback tone.
2.4. Transferring Calls, Announced
You can send an active call to another extension and either announce the call transfer or hang-
up to complete the transfer.
To transfer an active call:
1) Press the
[Trns]
2) Dial the number you wish to receive the transfer.
3) You may await answer and then hang-up, or just hang-up to complete the transfer.
, press
, press
Softkey.
Softkey.
, or press Line button.
, press
[EndC]
Softkey.
[Rsum]
6
User Guide
Softkey, or press Line button.
[Next]
Softkey.
[ OK ]
/
[Prev]
June 07
Advertisement
Table of Contents
