LIP-6812
Direct Station Selection (DSS) — one-touch calling to covered extensions, and the ability to pick
up calls ringing at those extensions.
Busy Lamp Field (BLF) — visual status indication of covered extensions.
The DSS/BLF feature in the LIP-6812 uses the Shared call appearance feature. Operation of
the DSS/BLF Coverage button however is distinctively different than a Shared Line.
To call an idle covered extension:
1) Lift the handset, press
2) Press the DSS/BLF Coverage button.
To answer a call to a covered extension:
1) Lift the handset, press
2) Press flashing DSS/BLF Coverage button.
The LED indications of the DSS Line button are:
Solid green
Slow blinking green
Solid red
Fast blinking red
Slow blinking red
NOTE: To use the DSS/BLF feature, the Line button must be configured as DSS (refer to
Installer Guide for the steps to configure the Line for DSS).
2.18. Hotline/ Warm-Line
The LIP Phone may be assigned for Hotline/Warm-Line operation. When assigned, the LIP
Phone will automatically place a call to the assigned destination. For Hotline, the call is placed
immediately upon an off-hook state. For Warm-Line, the call is placed after a delay, allowing
the user time to access another feature or Line as needed.
, press
, or press your Line button.
, press
, or press your Line button.
Line in use locally
Call held, locally
Line in use remotely
Call appearance ringing for covered Line
Remote call hold
12
User Guide
June 07