Lock Outgoing Call; Enabling Speed Number Dialing - LG 8820 User Manual

3.7 Lock Outgoing Call

_______________________________________________________________________________
The IP Phone can be configured to allow outgoing calls only if a password is entered. When enabled, the LCD screen
will display the password request and the pad-lock icon is shown, and the password must be entered prior to
connecting an outgoing call.
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD password.
To enable/disable the Lock Outgoing Call feature:
O Press the Setting (
O Dial 3, or move the cursor to
O
Dial 8, or move cursor to
O softkey to enable Lock Outgoing Call, or press the
Press the
Call.
O
Move to another parameter with the navigation buttons and continue the session or press the Setting (
button to exit the configuration session.

3.8 Enabling Speed Number Dialing

_______________________________________________________________________________
Enabling Speed Number Dialing
The LG 8820 IP Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record includes a
two-digit Speed number, see
contact number or user id from the associated Phone Book record.
To enable/disable Speed number operation:
O Press the Setting (
O Dial 3, or move the cursor to 3.Phone Settings using the
O Dial 10, or move cursor to
O Press the s softkey to enable Key Tone, or press the
O Move to another parameter with the navigation buttons and continue the session or press the Setting (
button to exit the configuration session.
16
) button.
3.Phone Settings
using the
8.Lock Outgoing Call
Speed Number Dialing.
) button.
10.Key Tone using the
PreviousNext
softkeys and press the
using the PreviousNextsoftkeys and press the
N
When enabled, dialing the Speed number (00~99) sends the
softkeys and press the
Pre ext softkeys and press the
Nsoftkey to disable Key Tone.
OK
OK
o
softkey to disable Lock Outgoing
softkey.
sof
O ftkey.
softkey
softkey.
)
)