Table of Contents
Advertisement
Controlling Visuals
Visual Control Settings
1.
Press the [VISUAL CONTROL] button .
The Visual Control screen (p. 34) will appear.
2.
Set the following parameters .
Parameter
Clip Ch
Effect Ch
Playback Speed Ctrl
Playback Speed Range
Dissolve Time Ctrl
Effect Ctrl 1
Effect Ctrl 2
Effect Ctrl 3
Keyboard Range Lower
Keyboard Range Upper
Note Message Enabled
Local Sw
3.
To save the settings, touch <SYSTEM WRITE> .
MEMO
Use the system setting "Visual Control Mode" (p. 86) to specify whether Visual Control is being used to control a MIDI Visual Control compatible
device or a V-LINK compatible device.
96
Value
1–16
1–16
OFF, CC01–CC31, CC64–CC95, Bender,
Ch Aftertouch
0.1–1.0–2.0, 0.5–1.0–2.0,
0.0–1.0–4.0, 0.5–1.0–4.0,
0.0–1.0–8.0, 0.5–1.0–8.0,
0.0–1.0–16.0, 0.5–1.0–16.0,
0.0–1.0–32.0, 0.5–1.0–32.0,
0.0–2.0–4.0, 0.0–4.0–8.0,
0.0–8.0–16.0, 0.0–16.0–32.0,
-2.0–1.0–4.0, -6.0–1.0–8.0
OFF, CC01–CC31, CC64–CC95, Bender,
Ch Aftertouch
OFF, CC01–CC31, CC64–CC95, Bender,
Ch Aftertouch
E1–G7
OFF, ON
OFF, ON
Explanation
Specifies the MIDI channel used to switch images.
Specifies the MIDI channel used to switch video effects.
Specifies the controller used to change the video playback speed.
Specifies the range in which the video playback speed will change.
The three values specify the playback speed (as a multiple of normal speed) when the
controller selected by Playback Speed Ctrl is at the minimum value, center value, and
maximum value, respectively.
Specifies the controller used to control the dissolve time (video switching time).
Specifies the controller used to control the video effect.
Specifies the range of keys that will switch images.
Turn this ON if you want note data to switch images. Normally, program change messages
are used to switch images, so you would leave this OFF.
Specifies whether the JUPITER-80 will (ON) or will not (OFF) produce sound when you play
notes in the zones specified for Keyboard Range Lower and Keyboard Range Upper.
* The Local Sw setting is not saved. It will automatically be ON when you turn on the
power.
Advertisement
Table of Contents
