Roland JUPITER-80 Owner's Manual
  1. Manuals
  2. Brands
  3. Roland Manuals
  4. Synthesizer
  5. Jupiter-80
  6. Owner's manual

Roland JUPITER-80 Owner's Manual

Synthesizer
Hide thumbs Also See for JUPITER-80:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUPITER-80 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Roland JUPITER-80

Summary of Contents for Roland JUPITER-80

  • Page 2: Important Safety Instructions

    WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage”...
  • Page 3 Copyright © 2011 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Roland, COSM, and SuperNATURAL are either registered trademarks or trademarks of...

  • Page 4: Using The Unit Safety

    Refer all servicing • The unit has been exposed to rain (or to your retailer, the nearest Roland Service Damaged cords are fire and shock hazards! otherwise has become wet); or...

  • Page 5: Important Notes

    Damage to speakers or other system components This JUPITER-80 for use only with Roland Never handle the power cord or its plugs may result. stand KS-18Z and KS-G8. Use with other...
  • Page 6 The use of such cables can cause the is reserved by Roland Corporation and/or Atelier sound level to be extremely low, or impossible Vision Corporation.

  • Page 7: Table Of Contents

    Getting Acquainted with the JUPITER-80 . . . . . . . . . . . . . . . . . .
  • Page 8 Detailed Settings for External Parts ..... . .92 Playing the JUPITER-80 from an External MIDI Device ...93 Editing a Synth Tone .

  • Page 9: Introduction

    Introduction...

  • Page 10: Main Features

    Behavior Modeling Technology Not only physical modeling of the instruments, Roland takes it a step further by modeling the instrument’s distinctive behavior that responds to how the performer plays, resulting in true-to-life, expressive sounds in realtime. A world of new sounds possible only with SuperNATURAL...
  • Page 11 In addition to the Upper Part and Lower Part that are the core of your performance, the Upper SuperNATURAL Tone x 4 JUPITER-80 provides a Solo Part that lets you play a melody or solo on the top note, and a Percussion Part that spices up your performance. Lower SuperNATURAL Tone x 4 All of these together can be instantly called up by pressing a Registration button.

  • Page 12: Getting Acquainted With The Jupiter-80

    The basic method of creating sound on the JUPITER-80 is to edit a Live Set by combining these powerful tones. What is a Registration? The combination of sounds assigned to the Upper Part, Lower Part, Solo Part, and Percussion Part, together with settings for the JUPITER-80 itself, can be saved as a single “Registration. ”...

  • Page 13: Tones

    Behavior Modeling Technology Not only physical modeling of the instruments, Roland takes it a step further by modeling the instrument’s distinctive behavior that responds to how the performer plays, resulting in true-to-life, expressive sounds in realtime.

  • Page 14: Live Sets

    Parts A Live Set consists of the Tones assigned to the four layers, settings The JUPITER-80 has four parts; Solo, Upper, Lower, and Percussion. for four MFX units, and settings for one reverb unit. You can assign a Tone or Live Set to each Part and play it.

  • Page 15: Registrations

    Getting Acquainted with the JUPITER-80 Registrations A Registration consists of these four Parts: Solo, Upper, Lower, and Percussion. Stored within a Registration are the settings for the sound selected for each Part, as well as settings for the Solo Part and Percussion Part.

  • Page 16: About Memory

    Getting Acquainted with the JUPITER-80 About Memory The area in which sounds and other settings are stored is called “memory. ” Memory is divided into three areas: temporary memory (the temporary area), rewritable memory, and non-rewritable memory. JUPITER-80 Temporary Area...

  • Page 17: Usb Memory Song Player/Recorder

    Bit Rate 16-bit Data Saved in USB Flash Drive A USB flash drive can hold audio files, MIDI files that you want to import as user arpeggio styles, and the JUPITER-80’s internal memory data that you’ve backed up. USB Flash Drive This folder is created when you make a backup (p.

  • Page 18: Panel Descriptions

    Connect USB flash memory (available separately) here. p. 17 VOLUME [VOLUME] knob Adjusts the overall volume of the JUPITER-80. p. 23 By moving your hand above the D Beam you can apply D Beam controller various effects to the sound.
  • Page 19 Panel Descriptions Number Area Name Explanation Page Use these buttons to edit values. To make the change occur more rapidly, hold down one button and press the opposite [DEC]/[INC] buttons button. You can also make the value change rapidly by p.

  • Page 20: Rear Panel Connections

    This turns the power on/off (“Turning With a USB cable, you can connect For connecting MIDI device Connect the included AC cord the Power On” (p. 23). the JUPITER-80 to your computer (p. 91). here. (p. 90). DIGITAL AUDIO OUT (COAXIAL) jack...

  • Page 21: Phones Jack

    Panel Descriptions SUB OUT jacks MAIN OUT (TRS) jacks MAIN OUT (XLR) jacks You can connect speakers here for use as monitors, Connect your speakers here. To employ monaural These are balanced output jacks for audio signals. or for outputting only the reverb sound. The system output, connect to the L/MONO jack.

  • Page 22: Placing The Jupiter-80 On A Stand

    Placing the JUPITER-80 on a Stand Be careful not to pinch your fingers when setting up the stand. If you want to place the JUPITER-80 on a stand, use the Roland KS-18Z or KS-G8. Place the instrument on the stand as follows.

  • Page 23: Turning The Power On

    Minimize the volume of the JUPITER-80 and your speakers . On the JUPITER-80’s rear panel, turn the [POWER] switch ON . * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

  • Page 24: Basic Operation

    Basic Operation This section explains the basic button and knob operations used to operate the JUPITER-80. Moving the Cursor A single screen or window will contain multiple items (parameters) to edit or select. To edit a parameter’s setting, you must first move the cursor to that parameter’s value.

  • Page 25: Editing A Value

    Basic Operation Editing a Value To edit the value highlighted by the cursor, use either of the following controllers. • Value dial • [DEC] [INC] buttons • Touch panel Value dial Turning the value dial toward the right will increase the value, and turning it toward the left will decrease the value.
  • Page 26 Basic Operation [E1]–[E4] knobs When knob icons are shown in the Lower Part of the screen, the [E1]–[E4] knobs will change the parameter values of those knob icons. MEMO You can assign performance-related functions to knobs [E1]–[E4]. The functions assigned to knobs [E1]–[E4] can be specified in the Registration Common/Control screen (p.

  • Page 27: Basic Touch Panel Operation

    Basic Operation Basic Touch Panel Operation The JUPITER-80’s display is a touch panel; you can perform a variety of operations by directly touching the display. Here are the basic rules. Screen indication Explanation Edit Displays an edit screen for Registrations or Live Sets.

  • Page 28: [Shift] Button Operations

    Basic Operation [SHIFT] Button Operations By holding down the [SHIFT] button and pressing another button, you can edit the settings of the button you pressed; i.e., this is a shortcut to the corresponding editing screen. Shortcut Description Page [SHIFT] + [ASSIGNABLE] Accesses the D Beam Assign setting screen.

  • Page 29: [Menu] Button Operations

    Basic Operation [MENU] Button Operations Assigning a Name When you press the [MENU] button, the Menu screen will appear in The JUPITER-80 lets you assign names to the following items. the display. • Registration • Live set • SuperNATURAL Synth Tone •...

  • Page 30: Navigating Between Screens

    Navigating Between Screens On the JUPITER-80, you navigate between screens by touching the enclosed areas or buttons shown in the illustrations below. Here we explain how to navigate between screens. For details on each screen, refer to the page indicated by the symbol.

  • Page 31: Registration Part Screen

    Navigating Between Screens Registration Part screen Here you can view the volume of the Registration, and the volume and pan settings of each Part. p. 36, p. 38 Registration PERC Part screen Registration SOLO Part screen p. 52 p. 52 Edit the settings of the Percussion Part.

  • Page 32: Live Set Screen

    Navigating Between Screens Live Set screen View the name and volume of the Tones assigned to each layer of the Live Set. p. 30 Tone List screen ] ive Set Effects Routing screen p. 57 p. 59 Select the Tone for each layer. Edit the effect settings for the Live Set.

  • Page 33: Live Set Effects Routing Screen

    Navigating Between Screens Live Set Effects Routing screen Edit the effect settings for the Live Set. p. 34, p. 61 Live Set MFX screen Live Set Reverb screen p. 59 p. 59 Edit the reverb parameters of the Live Set. Synth Tone Edit (OSC/FILTER/AMP) screen Edit the oscillator, filter, and amp settings of the SuperNATURAL Synth Tone.

  • Page 34: Tone Blender Screen

    39 Visual Control screen The Visual Control screen will appear when you press the [VISUAL CONTROL] button. Here you can use the JUPITER-80 to control video equipment that supports Visual Control. p. 95 MENU screen Press the [MENU] button to access the MENU screen.

  • Page 35: Playing Sounds

    Playing Sounds...

  • Page 36: Selecting The Sound For Each Part (Selecting Live Sets / Tones)

    Selecting the Sound for Each Part (Selecting Live Sets / Tones) If you press the same Part sound button once again, you’ll The JUPITER-80 has four Parts: Solo, Upper, Lower, and Percussion. You can assign a Tone or Live Set to each Part, and play it.

  • Page 37: Part's Tone

    Selecting the Sound for Each Part (Selecting Live Sets / Tones) Lower Part Instantly Switching the Variation Sounds (Alternate Button) By pressing the [ALTERNATE] button, you can select a different sound of the same type as that of the Part sound button. The sound that’s selected will be the one that is specified in “LIVE SET/TONE BUTTONS”...

  • Page 38: Playing Drum Sounds And Sound Effects (Percussion)

    Playing Drum Sounds and Sound Effects (Percussion) The JUPITER-80 provides a “Percussion” function, which lets you play Playing Drum Sounds on the Entire a variety of drum sounds and sound effects. Keyboard (Drums/SFX) Playing Percussion Sounds and Voice You can use the entire keyboard to play various drum and sound Phrases (Manual Percussion) effects (SFX).

  • Page 39: Split Performance

    Split Performance A “split” is a setup in which the keyboard is divided into zones, each Turning Split On playing a different Part. Lower Part Upper Part Solo Part Press the [SPLIT] button or [SOLO SPLIT] button . Split or Solo Split will turn on (the button will light). The screen will indicate the split status.

  • Page 40: How Split And Parts Are Related

    Split Performance How Split and Parts are Related The following table shows how the split status determines the Parts that are assigned to the keyboard. [MANUAL [DRUMS/SFX] [SPLIT] [SOLO SPLIT] Solo PERCUSSION] Upper Lower Percussion Changing the Split Point You can change the point (Lower Split Point or Solo Split Point) at which the keyboard is divided when Split or Solo Split are on. The Lower Split Point is the top key of the Lower Part;...

  • Page 41: Switching Registrations

    Switching Registrations A Registration is used to store the sounds selected for each Part, as Switching Banks well as various performance-related settings (system parameters are excepted). By switching Registrations, you can instantly change the song’s Each bank contains 8 Registrations. There are 4 banks, A–D, sounds while you perform, or change numerous settings with a meaning that 8 Registrations x 4 banks = 32 Registrations are single operation.

  • Page 42: Switching Registration Sets

    Switching Registrations Switching Registration Sets Switching Registrations Consecutively A Registration Set contains 4 banks (A–D). You can create 8 Registration Sets, meaning that 8 Registrations x 4 banks x 8 sets = 256 Registrations are available. Here’s how to switch Registrations consecutively. Here’s how to switch the Registration Set so that you can select other banks.

  • Page 43: Using The Arpeggiator

    Using the Arpeggiator The JUPITER-80 has an arpeggiator that automatically plays Holding the Arpeggio (HOLD) arpeggios. When you press notes on the keyboard, those notes will be automatically played as an arpeggio. The Hold function allows you to have the arpeggio continue even Arpeggios can be played in the Lower Part and Upper Part.

  • Page 44: Editing The Arpeggiator Settings

    Using the Arpeggiator Editing the Arpeggiator Settings Specifies the range in octaves in which the arpeggio will be sounded. Choose “0” if you want only the notes you play to be sounded. Choose “+1” if you want the notes of the Here’s how to make detailed arpeggiator settings for the style, Oct Range -3–+3...

  • Page 45: Creating An Arpeggio Style From A Midi File (Import)

    Using the Arpeggiator Select the SMF that you want to import, and then touch Creating an Arpeggio Style from a MIDI <IMPORT> . File (Import) Select the SMF. You can create your own original arpeggio style by importing an SMF (Standard MIDI File). MEMO •...

  • Page 46: Performing With Added Harmony

    Performing With Added Harmony Choose the desired Harmony Type . The Harmony Intelligence function adds appropriate harmony to the highest notes of the Upper Part, based on the chords you play in the Lower Part. Harmony Type Explanation When you turn Harmony Intelligence on, Split (p. 39) will also turn on; Harmony appropriate for organ sounds will be the right keyboard zone will play the sound of the Upper Part, and ORGAN...

  • Page 47: Controlling The Performance

    Controlling the Performance Moving Your Hand to Modify the Changing the Pitch/Applying Vibrato Pitch or Volume (D Beam Controller) (Pitch Bend/Modulation Lever) You use the D Beam controller simply by moving your hand above While playing the keyboard, move the lever toward the left to lower it.

  • Page 48: Using Pedals

    You can assign performance-related functions to the [E1]–[E4] knobs. The [E1]–[E4] knob assignments are specified by the The JUPITER-80 allows you to connect hold pedals (such as one Registration Common/Control screen (p. 52). from the DP series; available separately) and expression pedals (EV- 5;...

  • Page 49: Controlling The Rotary Effect And Reverb

    Controlling the Rotary Effect and Reverb The rotary effect adds modulation similar to what is produced by Controlling Reverb rotary speakers to the sound. Reverb applies the reverberation that accompanies a sound played in a hall or other acoustic environment. The REVERB [ON/OFF] button simultaneously turns on/off the You can control these effects by using panel buttons.

  • Page 50: Changing The Keyboard Settings

    Changing the Keyboard Settings Changing the Pitch by Octaves Transposing By pressing the OCTAVE [DOWN] button or OCTAVE [UP] button you Transpose is a function that shifts the keyboard’s pitch range in can shift the keyboard’s pitch range in steps of an octave. steps of a semitone.

  • Page 51: Editing Sounds

    Editing Sounds...

  • Page 52: Editing A Registration

    Editing a Registration A Registration stores the sounds selected for each Part, as well as Basic Operation for Registration various performance-related settings. Editing The Registration screen (p. 30) shows basic information about the currently selected Registration. In the Registration screen (p . 30), touch Registration’s Registration name Solo tone name Percussion tone name...

  • Page 53: Saving A Registration

    Editing a Registration Press the blinking Registration button . Saving a Registration A message will ask “Are you sure?” MEMO Edits you make to a Registration are temporary; they will be lost when you turn off the power or select another Registration. If you You can also save by touching <WRITE>...
  • Page 54 Editing a Registration If the following display appears when you save If you want to specify the Live Set number or SuperNATURAL Synth Tone number for saving, touch <SELECT DEST> . If Live Set parameters or SuperNATURAL Synth Tone parameters have been edited, the corresponding Live Set or SuperNATURAL Synth Tone will be highlighted when you save the Registration.

  • Page 55: Initializing A Registration

    Editing a Registration Initializing a Registration Here’s how to initialize the currently selected Registration. MEMO • Initializing the Registration will affect the data in the temporary area (p. 16). When you initialize the Registration, the Live Sets and tones in the temporary area will also be initialized.

  • Page 56: Editing A Live Set

    Editing a Live Set You can edit a Live Set by switching the Tones in the Live Set, and by adjusting offset values relative to the value of each tone. Tips for editing a Live Set The Live Set screen (p. 32) shows basic information about the currently selected Live Set.

  • Page 57: Changing A Live Set's Tones

    Editing a Live Set Changing a Live Set’s Tones MEMO If a Live Set has been edited, a check mark (red) will appear at the right of the Live Set name. Here’s how to change the Tones in a Live Set. In the Live Set screen (p .

  • Page 58: Layer On/Off And Volume Adjustment

    Editing a Live Set Layer On/Off and Volume Adjustment Switching the MFX (Multi-effects) To turn a layer on/off, touch its layer number in the Live Set screen Each Live Set contains four MFX (multi-effects) processors. (p. 32). To switch the MFX, access the “Live Set Effects Routing” screen. In the Live Set Effects Routing screen (p .

  • Page 59: Turning Mfx On/Off

    Editing a Live Set Adjusting the Effect Send Levels and Turning MFX On/Off Effect Output Levels To switch an MFX on/off, touch its MFX button. You can adjust the level at which the sound of each layer is sent to MFX, and the output level of the sound that has passed through the effect.

  • Page 60: Editing The Tones Assigned To A Layer

    Editing a Live Set Editing the Tones Assigned to a Layer Editing a Tone Here’s how to edit the sound of each layer. For SuperNATURAL Synth Tones, you can go deeper to create You’ll be able to edit selected parameters for each sound (Modify and save your own original tones.

  • Page 61: Simultaneously Adjusting Multiple Live Set Parameters

    The destination values can also be assigned randomly by the Specifies the current values as the new initial values (the <Set Src> JUPITER-80, allowing you to obtain a different sound every time. parameters of the Live Set will be updated). <Shuffle>...

  • Page 62: Convenient Ways To Use The Tone Blender

    Editing a Live Set Convenient Ways to Use the Tone Blender Saving a Live Set Edits you make to the Live Set are temporary; they will be lost if you Saving the sound created by the Tone Blender turn off the power or select another Live Set. If you want to keep the edited Live Set, you must save it to user memory.
  • Page 63 Editing a Live Set If the following display appears when you save Touch <WRITE> . If SuperNATURAL Synth Tone parameters have been edited, the corresponding Synth Tone(s) will be highlighted when you save the Live Set. A message will ask “Are you sure?” To save the Live Set, touch <OK>...

  • Page 64: Initializing A Live Set

    Editing a Live Set Specify the write destination . Initializing a Live Set Select the write destination for the Here’s how to initialize the currently selected Live Set. SuperNATURAL Synth Tone. MEMO • Initializing the Live Set affects the data in the temporary area (p.

  • Page 65: Copying A Layer

    Editing a Live Set Copying a Layer Here’s how to copy a layer to a different layer. This is a convenient way to create a variation based on an edited layer. In the Live set screen (p . 32), touch <UTILITY> . The Live Set Utility Menu screen will appear.

  • Page 66: Editing A Synth Tone

    Editing a Synth Tone In the Live Set Tone Modify screen (p . 32), touch <Synth You can edit a Synth Tone to create original sounds. Edit> . MEMO It’s not possible to edit SuperNATURAL Acoustic Tones, Manual Percussion, or Drums/SFX. To edit these tones, refer to “Editing the Tones Assigned to a Layer”...

  • Page 67: Volume And On/Off Settings For Each Partial

    Editing a Synth Tone • If a Synth Tone has been edited, a check mark (yellow) is shown Volume and On/Off Settings for Each at the right of the tone name. Partial You can turn a Partial on/off by touching the <Partial SW>. By touching <Partial SELECT>...

  • Page 68: Saving A Synth Tone

    Editing a Synth Tone Touch <WRITE> . Saving a Synth Tone A Synth Tone you edit is temporary; it will be lost if you turn off the power or select another tone. If you want to keep a Synth Tone you’ve edited, you must save it.

  • Page 69: Initializing A Supernatural Synth Tone/Partial

    Editing a Synth Tone Initializing a SuperNATURAL Synth Copying a Partial Tone/Partial Here’s how to copy the Partial settings from a SuperNATURAL Synth Tone to the specified Partial of the currently selected SuperNATURAL Synth Tone. Here’s how to initialize the currently selected SuperNATURAL Synth Tone or Partial.
  • Page 70 MEMO...

  • Page 71: Other Convenient Functions

    Other Convenient Functions...

  • Page 72: Using The Usb Memory Song Player/Recorder

    • Carefully insert the USB flash drive all the way in-until it is firmly in place. • Use USB flash drive available from Roland. Proper operation cannot be guaranteed if other USB device is used. The Song screen will appear. A list of the audio files on the USB flash •...

  • Page 73: Minimizing Sounds In The Center (Center Cancel)

    Using the USB Memory Song Player/Recorder Adjusting the Balance of Frequency Audio files that can be played Ranges (Equalizer) The USB memory song player provides a four-band equalizer. You Format MPEG-1 audio layer 3 can apply an equalizer to the audio file playback and to the sound Sampling Frequency 44.1 kHz being input via the AUDIO IN jack.

  • Page 74: Looping A Specific Region Of Time

    Using the USB Memory Song Player/Recorder Looping a Specific Region of Time Playing Audio Files Consecutively (Chain Play) You can specify start and end points within an audio file, and make the playback loop between those points. Here’s how the audio files in the same folder can be played In the Song screen (p .

  • Page 75: Creating A Folder

    Using the USB Memory Song Player/Recorder Creating a Folder Deleting an Audio File or Folder Here’s how to create a new folder inside the currently selected Here’s how to delete an unwanted audio file or folder. folder. NOTE In this example, we’ll create a new folder inside the audio folder There is no way to recover a deleted audio file or folder.

  • Page 76: Moving An Audio File Or Folder

    Using the USB Memory Song Player/Recorder Moving an Audio File or Folder Here’s how to move an audio file or folder to a different folder. First select the audio file or folder that you want to move (p . 72) . In the Song screen (p .

  • Page 77: Basic Operations In The Audio Rec Standby Screen

    Make the recording settings, and then touch <Start> . Your keyboard performance can be recorded to a USB flash drive. The audio being input via the JUPITER-80’s AUDIO IN jack and USB The [REC] button and [PLAY] button will light, and recording will COMPUTER connector can also be recorded.

  • Page 78: Audio Signal Flow

    Mode Level Using the Included USB Memory Protector You can use the included USB memory protector to prevent theft of the USB flash drive connected to the JUPITER-80. NOTE • You must use the included screws. • You must use the included Allen wrench to tighten or remove the screws. Using a tool that does not match the screw heads will damage them.

  • Page 79: Settings And Convenient Functions

    Backing Up All Settings to a USB In the MENU screen (p . 34), touch the desired function . Flash Drive You can back up all of settings in the JUPITER-80 to a USB flash drive (sold separately), or restore those settings into the JUPITER-80’s memory.

  • Page 80: Restoring Backed-Up Settings From A Usb Flash Drive

    • When you copy the backed-up data to your USB flash drive, the data that was previously on the USB flash drive will be lost. • You must copy the entire “ROLAND” folder. The system will not operate correctly if you copy only some of the files from the “ROLAND”...

  • Page 81: Initializing A Usb Flash Drive (Format)

    Initializing a USB Flash Drive Disabling the Registration Buttons (Format) The JUPITER-80’s settings will change if you press a Registration button unintentionally or switch Registration Sets. This operation will initialize (format) a USB flash drive. Use the “Registration Button Lock” function if you don’t want the Registration buttons to switch Registrations while you perform.

  • Page 82: Exchanging Registration Sets

    Settings and Convenient Functions Exchanging Registration Sets Calibrating the Touch Panel Here’s how to exchange entire Registration Sets. Perform this calibration if the touch panel does not operate as you expect. In the MENU screen (p . 34), touch <Regist Set Exchange> . In the MENU screen (p .

  • Page 83: The Jupiter-80'S System Settings

    The JUPITER-80’s System Settings Making System Settings System Parameters These settings apply to the entire JUPITER-80; for example, here you This section explains what each system parameter does, and how can set the tuning and specify how MIDI messages will be received.
  • Page 84 The keyboard will have a lighter-feeling touch. Since you’ll be able to reach fortissimo (ff ) without having to play as strongly as If you’re using an external sequencer with the JUPITER-80’s LIGHT with the MEDIUM setting, the keyboard will keyboard controller section and sound generator section, feel lighter.
  • Page 85 Turn this “OFF” if you don’t want to switch Channel Registrations from a connected MIDI device. Specifies the MIDI receive channel that will play each of the JUPITER-80’s Parts (PREC, LOWER, Part Channel 1–16 UPPER, SOLO), and the MIDI transmit channel on which each Part will transmit to an external MIDI device.

  • Page 86: Output Assign

    System controls 1–4 are parameters to which you can assign MIDI messages such as control change messages. Upper Upper Part For example, on the JUPITER-80, if you choose a system control Lower Lower Part as the MFX CONTROL Source (Live Set MFX screen; p. 33), you’ll be able to use MIDI messages to control effect parameters.

  • Page 87: Live Set/Tone Buttons

    Registration, the Registration settings will take priority. When you execute the Factory Reset operation, all data in the JUPITER-80 will be lost. If there is any data that you want to REFERENCE keep, back it up to a USB flash drive (p. 79).
  • Page 88 MEMO...

  • Page 89: Connecting Other Equipment

    Connecting Other Equipment...

  • Page 90: Connecting To Your Computer Via Usb

    JUPITER-80 to your application. USB audio Settings for JUPITER-80 computer If the JUPITER-80 is connected via a USB cable to your computer, the USB cable same sound as from the JUPITER-80’s MAIN OUT can be recorded (Supports USB 2 .0 Hi-Speed) into your computer (except for the metronome sound).

  • Page 91: Connecting An External Midi Device

    If a MIDI cable You can connect external MIDI devices to the JUPITER-80’s MIDI is connected between devices equipped with MIDI connectors, OUT connector, and use the JUPITER-80 to control the connected you’ll be able to play multiple devices from a single MIDI keyboard,...

  • Page 92: Specifying The Transmit Channel

    Connecting an External MIDI Device Specifying the Transmit Channel Detailed Settings for External Parts Set the JUPITER-80’s transmit channel so it matches the channel Here you can make detailed settings for the messages transmitted your external MIDI device is using for reception.

  • Page 93: Playing The Jupiter-80 From An External Midi Device

    Connecting an External MIDI Device Playing the JUPITER-80 from an Setting the Program Change Receive Switch External MIDI Device Here’s how to turn on the receive switch for program change and bank select messages. With the factory settings, both are turned Connection example “ON.

  • Page 94: Synchronizing With An External Midi Device

    Connecting an External MIDI Device Synchronizing with an External MIDI Device Here’s how to synchronize the JUPITER-80’s tempo to an external MIDI device. Connection example MIDI device MIDI OUT connector MIDI IN connector MIDI OUT connector JUPITER-80 MIDI IN connector In the System Setup screen, touch <Sync/Metronome>...

  • Page 95: Controlling Visuals

    You’ll need a MIDI cable (sold separately) to connect the JUPITER-80 to your Visual Control compatible device. Connection example Use a MIDI cable to connect the JUPITER-80’s MIDI OUT connector (p. 20) to the Visual Control compatible device’s MIDI IN connector. NOTE To prevent malfunction and speaker damage, be sure to minimize the volume on all devices and turn off their power before making connections.

  • Page 96: Visual Control Settings

    OFF, ON are used to switch images, so you would leave this OFF. Specifies whether the JUPITER-80 will (ON) or will not (OFF) produce sound when you play notes in the zones specified for Keyboard Range Lower and Keyboard Range Upper.

  • Page 97: Appendix

    Appendix...

  • Page 98: Error Message List

    Make sure that USB flash drive is correctly connected (p. 6, p. 17). Data could not be read from the USB flash drive. Also make sure that you’re using a USB flash drive sold by Roland. Read Error! The file is damaged.

  • Page 99: Troubleshooting

    When you play high notes on the JUPITER-80, you might hear This is usually because you have exceeded the highest note Notes played in a high notes that fail to sound, whose pitch fails to rise, or a noise that that the JUPITER-80 is able to produce, and won’t occur with...
  • Page 100 Problems with the USB Memory Song Player/Recorder Format the USB flash drive on the JUPITER-80 (p. 79). The JUPITER-80 can use USB flash drive that is formatted as FAT. USB flash drive is not (Normally, when you purchase USB flash drive, it will be format- detected / Song files are Check the format of your USB flash drive.

  • Page 101: Specifications

    4-Band Equalizer: 1 unit 39 lbs 1 oz USB Flash Memory (sold separately) Owner’s manual External Memory * Use USB Flash Memory sold by Roland. We cannot guarantee CD-ROM (USB Audio/MIDI driver) operation if other products are used. Accessories DVD-ROM (SONAR LE)

  • Page 102: Midi Implementation Chart

    MIDI Implementation Chart Date : Apr. 1, 2011 Model JUPITER-80 Version : 1.00 Transmitted Recognized Remarks Function... Basic Default 1–16 1–16 Changed 1–16 1–16 Channel Default Mode 3 Mode 3 Mode Message Mono, Poly Mode 3, 4 (M=1) Altered ************** Note 0–127...

  • Page 103: Index

    <COMMON> ....56, 61 Master Keyboard ....91 Playing the JUPITER-80 from an Connecting the JUPITER-80 to Your Master Key Shift .
  • Page 104 Restoring the Factory Settings . 87 ROLAND Folder ....17 Saving ......83 Rotary .
  • Page 105 Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. TAIWAN ECUADOR RUSSIA OMAN AFRICA EUROPE ROLAND TAIWAN ENTERPRISE Mas Musika Roland Music LLC TALENTZ CENTRE L.L.C. Rumichaca 822 y Zaruma Dorozhnaya ul.3,korp.6...
  • Page 106 For EU Countries For China...

  • Page 107: Declaration Of Conformity

    Compliance Information Statement Model Name : JUPITER-80 Type of Equipment : Synthesizer Responsible Party : Roland Corporation U.S. Address : 5100 S. Eastern Avenue Los Angeles, CA 90040-2938 Telephone : (323) 890-3700 For EU Countries This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC.

Table of Contents