SMC Networks SMC9432BTX User Manual page 40

I C
NSTALLING AND
Automatic Installation with EZStart
Use EZStart's "Automatic Novell DOS ODI" feature when you
require greater customization than offered by EZdosodi (for
example, if you wish to specify a server name or a specific
Ethernet frame type). You will have the choice of modifying your
CONFIG.SYS and AUTOEXEC.BAT files. If you choose this option,
the workstation will automatically attach to the server upon reboot.
Custom Installation with EZStart
For a basic NetWare Client installation which will copy the client
files and the SMC driver to your hard drive, use EZStart's "Custom
Setup" procedure.
1. Switch to the drive containing the SuperDisk, type "EZSTART,"
and press "Enter." You will be presented with the main screen.
2. From the main screen, select "Custom."
3. From the "Custom Installation" screen, select "Drivers/
Documents."
4. From the "Driver Installation" screen, select "Automatic Novell
DOS ODI" (customization capability) or "Novell" (will not
modify AUTOEXEC.BAT or attach to a server upon reboot,
providing a greater capability to customize). After selecting
"Novell," select "Novell NetWare DOS Client (DOS ODI)."
5. Select "Copy Files" to copy all the files used by this driver from
the SuperDisk to the destination directory recommended by
EZStart, or to a different directory that you specify.
6. Edit the NET.CFG file and check that the first frame type
specified is the same as that used by the server. Note that there
is no need to specify PCI slot number or Interrupt number.
7. Reboot your workstation. The DOS ODI driver will
automatically load each time you reboot if you have modified
your AUTOEXEC.BAT file to call STARTNET.BAT.
3-10
N
ONFIGURING ETWORK
D
RIVERS