Connecting A Thin Coax Cable - SMC Networks SMC9432BTX User Manual

Connecting a Thin Coax Cable

The SMC9432BTX provides a BNC connector that supports a thin
coax cable network connection (see Figure 2-2). Connection to a
thin coax cable requires a BNC T-Connector, as shown in Figure
2-3 on the following page.
Figure 2-2. BNC Connector Port (SMC9432BTX)
Use the following procedure to make a BNC connection to the
network.
1. Align the T-Connector's slots with the pins on the network
card's BNC port, push in the T-Connector, and twist the collar
clockwise to secure it in place.
2. Attach one end of a thin coax cable to one side of the
T-Connector.
3. Attach one end of another thin coax cable to the other side of
the T-Connector. If the network card is at the end of the cable,
attach a 50-ohm terminator to the T-Connector, as shown in
Figure 2-3.
N C
ETWORK ABLE
C
ONNECTION
2-3