Running Ezstart; In A Dos Environment - SMC Networks SMC9432BTX User Manual

6. For the Command Line entry, type the complete path to the
SuperDisk files and then type "EZSTART.EXE." For example:
C:\> SMC\EZSTART.EXE
Note: You can use the EZSTART.PIF file instead of EZSTART.EXE
for more control over the environment in which EZStart
loads. For more information on working with .PIF files, refer
to the Microsoft Windows documentation.
7. Select "Change Icon."
8. Select "OK."
9. Select "Browse" and then select the directory containing the
EZStart utility.
10.Select the "EZSTART.ICO" file to install the icon on your
Windows desktop.
11.Select "OK" with each window, until you return to your
Windows desktop.

Running EZStart

In a DOS Environment

1. To run EZStart from the SuperDisk, insert the SuperDisk in a
drive, select that drive, type "EZSTART," and press the Enter
key. For example:
C:\> A: <Enter>
A:\> EZSTART <Enter>
2. To run EZStart from the hard disk, change to the directory on
the hard disk containing the SuperDisk files, type "EZSTART,"
and press Enter. For example:
C:\> CD SMC <Enter>
C:\SMC> EZSTART <Enter>
U EZS
SING TART
D-3