Firmware Upgrade; Ping - TP-Link TL-SL2210 Reference Manual

TL-SL2428# copy tftp startup-config ip-address 192.168.0.148 filename
config

firmware upgrade

Description
The firmware upgrade command is used to upgrade the switch system file via
the TFTP server.
Syntax
firmware upgrade ip-address ip-addr filename name
Parameter
ip-addr —— IP address of the TFTP server.
name —— Specify the name for the firmware file.
Command Mode
Privileged EXEC Mode
Example
Upgrade the switch system file named as firmware.bin via the TFTP server with
the IP address 192.168.0.148:
TL-SL2428#
firmware.bin

ping

Description
The ping command is used to test the connectivity between the switch and one
node of the network.
Syntax
ping {ip_addr} [-n count] [-l count] [-i count]
Parameter
ip_addr —— The IP address of the destination node for ping test.
count (-n) —— The amount of times to send test data during Ping testing. It
ranges from 1 to 10. By default, this value is 4.
count (-l) —— The size of the sending data during ping testing. It ranges from 1
to 1024 bytes. By default, this value is 64.
firmware upgrade
66
ip-address 192.168.0.148 filename