Show Spanning-Tree Interface-Security - TP-Link TL-SL2210 Reference Manual

Syntax
show spanning-tree interface [ fastEthernet port | gigabitEthernet port ]
[ edge | ext-cost | int-cost | mode | p2p | priority | role | state | status ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the spanning-tree information of all ports:
TL-SL2428(config)# show spanning-tree interface
Display the spanning-tree information of port 2:
TL-SL2428(config)# show spanning-tree interface fastEthernet 1/0/2
Display the spanning-tree mode information of port 2:
TL-SL2428(config)# show spanning-tree interface fastEthernet 1/0/2 mode

show spanning-tree interface-security

Description
The show spanning-tree interface-security command is used to display the
protect information of all ports or a specified port.
Syntax
show spanning-tree interface-security [ fastEthernet port | gigabitEthernet
port ] [ bpdufilter | bpduguard | loop | root | tc | tc-defend ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the protect information of all ports:
TL-SL2428(config)# show spanning-tree interface-security
Display the protect information of port 1:
TL-SL2428(config)#show spanning-tree interface-security fastEthernet
1/0/1
126