Show Spanning-Tree Interface-Security; Show Spanning-Tree Mst - TP-Link TL-SG2008 Reference Manual

TL-SG2008(config)# show spanning-tree interface gigabitEthernet 1/0/2
Display the spanning-tree mode information of port 2:
TL-SG2008(config)# show spanning-tree interface gigabitEthernet 1/0/2
mode

show spanning-tree interface-security

Description
The show spanning-tree interface-security command is used to display the
protect information of all ports or a specified port.
Syntax
show spanning-tree interface-security [ gigabitEthernet port ] [ bpdufilter |
bpduguard | loop | root | tc | tc-defend ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the protect information of all ports:
TL-SG2008(config)# show spanning-tree interface-security
Display the protect information of port 1/0/1:
TL-SG2008(config)#show spanning-tree interface-security gigabitEthernet
1/0/1
Display the interface security bpdufilter information:
TL-SG2008(config)# show spanning-tree interface-security bpdufilter

show spanning-tree mst

Description
The show spanning-tree mst command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst { configuration [ digest ] | instance instance-id
[ interface [ gigabitEthernet port ]]}
129