Hard Drive Carrier Leds - Supero A+ SERVER 1022G-NTF User Manual

A R
+ SE VER 1022G-NTF User's Manual
3-4

Hard Drive Carrier LEDs

Each hard drive carrier has two LEDs.
•
Green: When illuminated, the green LED on the front of the drive carrier indi-
cates drive activity. A connection to the drive backplane enables this LED to
blink on and off when that particular drive is being accessed.
•
Red: The red LED indicates two states. When blinking, it indicates the drive
is rebuilding. When solid, it indicates a drive failure. If a hard drive fails, you
should be notified by your system management software. Please refer to
Chapter 6 for instructions on replacing failed hard drives.
3-4