Table of Contents
Advertisement
3. Press the <Esc> key twice and scroll to the "Exit" menu. Select "Save
Changes and Exit" and press <Enter>, then press <Enter> again to verify.
4. After exiting the BIOS Setup Utility, the system reboots. When prompted
during the startup, to use the DotHilll RAID Utility program press <CTRL+R>
(Figure 5-6), or to use the Adaptec RAID Utility program press <CTRL+A>
(Figure 5-7).
Chapter 5: Advanced Serverboard Setup
Figure 5-5. BIOS Setup Screen
5-25
Advertisement
Table of Contents
