Hdd; Power; Hard Drive Carrier Leds - Supero SUPERSERVER 6018R-TDW User Manual

HDD

Indicates IDE channel activity. On the SuperServer 6018R-TDW, this light indicates
HDD and/or DVD-ROM drive activity when flashing.

Power

Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
3-4

Hard Drive Carrier LEDs

Each hard drive carrier has two LEDs.
•
Green: When illuminated, the green LED on the front of the drive carrier indi-
cates drive activity. A connection to the SATA backplane enables this LED to
blink on and off when that particular drive is being accessed.
•
Red: The red LED indicates two states. When blinking, it indicates the drive is
rebuilding. When solid, it indicates a drive failure. If a drive fails, you should be
notified by your system management software. Please refer to Chapter 6 for
instructions on replacing failed drives.
Chapter 3: System Interface
3-3