Mitsubishi Electric AG-150A Instruction Book page 50

Handwriting input screen
When "Japanese" or "Chinese" is selected, characters can be input by using a handwriting pad.
1Handwriting
input area
2Clear button
Item
1Handwriting input area
2Clear button
3Input candidate character
button
4Memorized input word button
5Handwriting switch button
This area is used to input characters.
Handwrite a character in this area.
Candidate characters will be shown on the Input candidate character buttons. Select the
character you want and touch the button.
Note: Handwrite slowly otherwise the character cannot be recognized correctly.
Note: Handwrite characters in the correct stroke order otherwise the character cannot be
recognized correctly.
Note: If a pen is used, it should not be sharp.
Clears the handwriting input area.
Shows five candidate characters of high similarity with the input character.
Touch the button with a desired character to enter the character.
Note: If a desired character is not shown, press Clear button to clear the input area and
rehandwrite slowly.
Shows words input in the past.
Touch a button that shows your desired character to enter the character.
Note: The words shown here are registered originally or input in the past.
Displays handwriting input screen.
– 49 –
Description
3Input candidate
character button
4Memorized input
word button
5Handwriting
switch button