Temporary Error - Fujitsu fi-4220C2 Getting Started

■ Temporary error

Indication
U0 Shipping lock error
U1 Paper feed error
U2 Multi feed error
U4 The ADF cover is opened.
To troubleshoot the indicated errors above:
• "U0" error
Confirm that the shipping lock is released.
• "U1" error
Remove all jammed documents.
Confirm that the documents meet the paper condi-
tions for scanning.
Refer to fi-4220C2 Operator's Guide "5. Trouble-
shooting" on the Setup CD-ROM.
• "U2" error
Remove all jammed documents.
Confirm that the documents are within the required
paper preconditions for scanning.
Refer to fi-4220C2 Operator's Guide "6.2 Docu-
ment Quality" on the Setup CD-ROM.
• "U4" error
Close the ADF cover completely. For the details,
refer to "5 TROUBLESHOOTING" in the "fi-
4220C2 Operator's Guide" on the Setup CD-ROM.
AP-3
Meaning
■ Device alarm (Non-Temporary
error)
Indication
E0 Flatbed motor malfunction.
E1 Trouble in the optical system
(Flatbed).
E2 Trouble in the optical system
(front).
E3 Trouble in the optical system
(back).
E4 The motor's fuse has blown out.
E6 Trouble in the operator panel.
E7 Trouble occurred in the EEPROM.
E8 The SCSI interface fuse has blown
out.
E9 An error in the image memory.
Ec An alarm in the memory.
Ed Trouble with the SCSI interface
controller.
EF Trouble with the background
switching mechanism.
When you encounter any alarm on the display, turn
the scanner off and on. If the alarm is still displayed
on the Function Number display, contact the store
where you purchased the scanner or an authorized
FUJITSU scanner service provider.
Meaning