Fujitsu fi-4220C2 Getting Started page 19

5. Click [INSTALL PRODUCTS].
6. Click [ISIS Driver] on the window below.
7. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that dis-
plays troubleshooting information on screen if
any scanner error occurs. Although this soft-
ware's installation is highly recommended, the
performance of the scanner would not be
affected if not installed.
When you select [Yes] for installing
ATTENTION
Error Recovery Guide, the [Choose
Setup Language] window appears.
Select a language and follow the
instructions on the window. The Error
Recovery Guide will automatically
continue finishing its installation.
Please wait until the installation of
TWAIN driver automatically starts.
8. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
9. Follow the instructions on the window to install
the application.
10. When the [InstallShield Wiizard Complete] win-
dow appears, click [Finish].
11. Your computer will be restarted and the scan-
ner will be detected. Do not remove the Setup
CD-ROM from the CD drive until your PC has
completely restarted
ATTENTION
Now the installation of the scanner driver is completed.
fi-4220C2 Image Scanner Getting Started
Depending on the OS, these opera-
tions may be necessary.
For Windows 98:
When a request for inserting the CD-
ROM for Windows 98 appears, insert
it into the CD drive and click the [OK]
button.
For Windows 2000:
When [Digital Signature not Found]
appears, click [Yes].
For Windows XP:
1. When [Found New Hardware Wiz-
ard] appears, confirm that the Setup
CD-ROM is set in the CD drive, then
click the [Next] button.
2. When any alarm is displayed on
[Hardware Installation] window,
click the [Continue Anyway] button.
3. Click the [Finish] button.
10