Temperature Visual Display; Setting Bake - Kenmore 790.9750 Series Use & Care Manual

Setting Oven Controls
Important Things to Know Before Setting any Basic Oven Cooking Function
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKES or BREADS
function with the oven set temperature automatically set for 350°F. However if desired, the oven set temperature may be
adjusted at any time during the cooking process. You may also choose to add a COOK TIME or DELAy START with any of
the functions listed above.

Temperature Visual Display

Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be shown
in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound to
remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast, cakes and breads. NOTE: The lowest temperature that can be displayed is 100°F.

Setting Bake

The pad controls normal baking. If preheating is necessary, refer to the
be programmed to bake at any temperature from 170° F to 550° F (77° C to 288° C).
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
2. Press .
, "350" will automatically appear in the display (Fig. 1).
3. Press
4. Press . The actual oven temperature will be displayed (Fig. 2).
A beep will sound once the oven temperature reaches 350° F.
will cancel the Bake feature at any time.
Pressing
To change the Bake Temperature (example: changing from
350° to 425°F)
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press
4 2 5
. "425°" will appear in the display (Fig. 3).
2. Press
3. Press . The actual oven temperature will be displayed (Fig. 2).
A beep will sound once the oven temperature reaches "425°".
Pressing will cancel the Bake feature at any time.
Note: If the oven was recently heated from prior cooking and has remained heated, the bake element symbol may not show
in the display immediately.
Note: During the first rise of temperature, the convection fan will be activated to allow the oven to reach its target temperature
faster. The bake, broil and convection elements will cycle to allow a better heat distribution.
INSTRUCTIONS
Preheat Feature for instructions. The oven can
PRESS
.
4 2 5
21
DISPLAy
Fig. 1
Fig. 2
Fig. 3