Table of Contents
Advertisement
User Tools (System Settings)
Set Key Card
Specifies whether to use the optional key card to manage the count for the
[Copier] function.
Auto Off Timer
After copying, or no other key operations are performed, the machine turns
itself off (apart from the main power switch) after a specified period. This is
called a Auto Off. This setting specifies the time interval before entering this
2
mode.
Note
Default: 60 minutes
The time can be set from 1 to 240 minutes.
AOF (Keep It On.)
Makes the Auto Off Timer setting active. Leave this set to on.
For details about this function, contact your service representative.
• On
• Off
Optional Hard Disk
When the optional hard disk is not installed, this should be left set to not in-
stalled.
When the optional hard disk is installed, if the hard disk should fail, you can
still use the machine temporarily if you turn the hard disk off. (Some func-
tions may not be available.)
• Installed
• Not Installed
Note
Default: Not Installed
Limitation
When the optional hard disk is installed, if you turn the hard disk off, you
can not use the following functions.
• Repeat Copy (longer than A0(E)K)
• Stamp
• Sort
• Rotate Sort
• Restart Copy (longer than A0(E))
• Format Overlay
• Sample Copy (longer than A0(E))
26
Advertisement
Table of Contents
