Table of Contents
Advertisement
User Tools (System Settings)
System Reset Timer
After copying, or no other key operations are performed, the machine dis-
plays the function selected in the Function Priority setting after a specified pe-
riod. This is called a System Reset. This setting specifies the time interval for
the System Reset function.
Note
Default: 60 seconds
2
The time can be set to 0 and from 10 to 999 seconds.
If this setting is set to 0, the System Reset function is turned off.
Fine Magnification: Copier
Depending on the type of paper, and on the effects of humid or hot condi-
tions, the copy paper can expand or shrink slightly. This can mean that the
size of the copy and the original do not match, If this happens, you can specify
the vertical and horizontal magnification ratio. You can specify this setting for
each paper type. (Plain paper, Translucent Paper, Film, Other)
• -1.0% to 1.0% (in 0.1% steps)
22
ZEDG310E
Advertisement
Table of Contents
