Table of Contents
Advertisement
User Tools (System Settings)
Ready Tone
Specifies whether or not the machine should emit a tone when the "Ready to
Copy" message is displayed.
• On
• Off
Note
2
Default: On
Copy Count Display
Specifies the type of display for the copy count.
If you press the [Up] key, the display counts upwards, if you press the [Down]
key, the display counts downwards.
• Up
• Down
Note
Default: Up
Panel Off Level
Specifies the energy saving level for when the machine enters standby mode.
Note
Default: Level 2
The level can be set from 1 to 4.
Level
Standby level 1
Standby level 2
Standby level 3
Standby level 4
*1
If the warm-up time is set to 0 seconds, it will take longer to print continuous
copy jobs. (Continuous copying speed reduction.)
Panel Off Timer
After copying, or no other key operations, have been performed the machine
switches to standby mode after a specified period.
• 0, 10 – 999 sec.
• 60 sec.
24
Energy saving
Compared to normal operation, approx. 0%
reduction
Compared to normal operation, approx. 10%
reduction
Compared to normal operation, approx. 20%
reduction
Compared to normal operation, approx. 30%
reduction
Warm-up time
*1
Approx. 0 sec.
*1
Approx. 0 sec.
*1
Approx. 0 sec.
*1
Approx. 0 sec.
Advertisement
Table of Contents
