Table of Contents
Advertisement
Bypass Tray Paper Type
Specifies the thickness for the paper in the bypass tray. If the image on copies
is scratched, or the paper wrinkles when using translucent paper (vellum),
you can change the setting to get better copies.
Select Plain, Translucent Paper (vellum), or Film.
Note
For a guide to paper thickness, see the P.16 "Fusing Adjustment: Paper Tray"
chart. However, the results for recording paper cannot be guaranteed.
Note
Default: 3
The paper thickness can be set from 1 (Thicker) to 5 (Thinner).
Original Size Detect
Specifies whether the scanning area when detecting the size of an original.
• Metric version
• A Series
• JIS B Series
• Inch version
• Engineering
• Architecture
Note
Default:
• Metric version: A series
• Inch version: Engineering
When you change the setting, the following changes are made to the User
Auto R/E Original Size Detect setting in User Tools (Copier Features).
Metric version
• For A series JIS-B series, if B1 is set for the User Auto Reduce/En-
large settings, the User Auto R/E Original Size Detect setting is
changed to vertical.
• B series JIS-A series, if A0 is set for the User Auto Reduce/Enlarge
settings, the User Auto R/E Original Size Detect setting is changed to
vertical.
Inch version
When switching Engineering
Auto Reduce/Enlarge settings, the User Auto R/E Original Size Detect
Setting is changed to vertical.
Reference
See "User Auto R/E Original Size Detect" in the Copy Reference manual.
See "User Auto Reduce/Enlarge" in the Copy Reference manual.
Settings You Can Change with the User Tools
Architecture, if E is set for the User
2
17
Advertisement
Table of Contents
