Download Print this page

HP rp3000 Quickspecs page 7

Point of sale (pos) system
Hide thumbs Also See for rp3000:

Advertisement

QuickSpecs
Standard and Configurable Components
Ports
Chipset
Processor and
Speed*
* Processor is part of the system board and is not upgradeable.
Memory
Maximum Memory
Slots
USB
Serial
Integrated modem
PS/2
Video
Audio
NIC
Intel 945GC with ICH7
Intel Atom 230 (1.6 GHz, 512KB L2 cache, 533 MHz FSB)
DDR2 SYNCH DRAM NON-ECC MEMORY
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This
chart does not represent all possible memory configurations. The Intel 945GC chipset also supports non-
ECC DDR2 PC2-5300 (667 MHz) memory, as well as PC2-3200 and PC2-4200.
If speeds are mixed, speed will default to the slowest DIMM.
1-GB DDR2 Synch DRAM PC2-6400 (800 MHz)* Non ECC (1 x 1 GB)
2-GB DDR2 Synch DRAM PC2-6400 (800 MHz)* Non ECC (1 x 2 GB)
2-GB DDR2 Synch DRAM PC2-6400 (800 MHz)* Non ECC (2 x 1 GB)
4-GB DDR2 Synch DRAM PC2-6400 (800 MHz)* Non ECC (2 x 2 GB)
* PC2-6400 800 MHz memory will run at rp3000 maximum memory speed of 533 MHz.
Supports up to 4 GB of DDR2 Synch DRAM.
PCI
DA - 13113 North America — Version 13 — June 21, 2013
HP rp3000 Point of Sale (POS) System
6 USB 2.0
Plus 2 additional USB+POWER on some models; 1 @ 12V, 1 @ 24V
2 RS232 individually configurable to power 5V & 12 V.
Plus 2 additional RS232 on some models via PCI card. Individually configurable
to power 5V and 12V
RJ-11 (select models)
2
1
2, line in and line out
RJ-45
Full-height, half-length PCI slot
or support for (1) optional PCIe x1 slot (full-height, half-length)
NOTE: Either the PCI riser or PCIe x1 riser can be installed (not both at the same
time)
NOTE: Maximum length supported for PCI or PCIe x1 cards is 6.6 in. (16.76 cm)
Page 7

Advertisement

loading