HP rp3000 Quickspecs page 18

QuickSpecs
Technical Specifications - Communications
Two preconfigured serial port jumper configurations are available by selecting one of the following two part
numbers when you order the rp3000.
Service Preconfig 2x PWRD RS232 5V/12V
Service Preconfig 4x PWRD RS232 5V/12V
When you order either option, the serial port jumpers will be preconfigured so that 12V will on the DSUB pin
1 and 5V will be on the DSUB pin 9.
If you order GH655AV, the TWO serial ports on rp3000 will be configured for power.
If you order GH656AV, FOUR serial ports will be configured for power. However, you must first order the HP
2-Port Powered Serial Port Card, option part number KH887AA, since there are only two serial ports on the
rp3000. Adding the powered serial card option provides a total of four serial ports.
Below is a diagram showing the jumper settings for each of these optional preconfigured serial/COM port
options.
Serial/COM Port Preconfiguration Options:
DA - 13113 North America — Version 13 — June 21, 2013
HP rp3000 Point of Sale (POS) System
GH655AV
GH656AV
Page 18