HP rp3000 Quickspecs page 23

QuickSpecs
Technical Specifications - Communications
LSI MDC Hi-Speed 56K
International SoftModem
Telecom
Other
Data Transmission
Data Speeds
Data Standards
Fax Speeds
Fax Mode Capabilities
Error Correction and Data
Compression
Power Management
Upgradeability
Video
Other
Operating Temperature
Operating Humidity
Power
Chipset
Dimensions (L X H)
Connection
Other Features
DA - 13113 North America — Version 13 — June 21, 2013
HP rp3000 Point of Sale (POS) System
FCC Part 68, IC-CS-03 (Canada); Worldwide PTT approvals
Not available in Korea or the Republic of South Africa.
The SV92EX device is packaged in a 32-pin micro leadless chip carrier (MLCC).
The SV92EX is fully compliant with the PCI Express revision 1.1 specification.
WHQL approved; ASPM compliant.
Technology speeds: 56,000 Kbps maximum downstream data, controllerless
NOTE: 56 Kbps technology refers to download speeds only and requires
compatible modems at server sites. Other conditions may limit modem speed.
FCC limitations allow a maximum of 53 Kbps during download transmissions.
(Upload only) 33,600/31,200/28,800/26,400/21,600/19,200/
16,800/14,400/12,000/9,600/7,200/4,800/2,400/1,200/300
ITU-T V.90, ITU-T, ITU-T V.34, V.44, V.42, V.42bis21, V.32bis, Bell 212A, and
Bell 103
14,400/12,000/9,600/7,200/4,800/2,400/1,200/300 b/s
ITU-T T.31 class 1 FAX, V. 17, V.29, V.27ter, and V.21 Channel 2
V.44, 42bis, V.42 and MNP2-5
HDA Bus Power Management Interface Specification 2.3 D0, D3hot, and
D3cold. Meets AC97' 2.3 specification.
Driver upgradeable for future enhancements
ITU-T V.80 video ready interface
TIA/EIA 602 standard AT command set
Integrated DTE interface with speeds of up to 115.2 Kbps, parallel 16550a
UART-compatible interface
32° to 158° F (0° to 70° C)
20% to 90%, non-condensing
HDA bus interface:– Compliant with the Intel High Definition Audio
Specification Revision 1.0.– SV92A35 supports 1.5 V and 3.3 V signaling
(SV92A3 supports 3.3 V only).AC'97 bus interface:– Compliant with the Audio
Codec '97 Specification Revision 2.3. The Delphi modem offer the ability to
disable modem in BIOS.
The SV92A3 and SV92A35V2 devices automatically detect the type of bus
connected to the modem and initialize the devices for the correct interface.
The automatic bus interface detection feature of the SV92A35V2H device is
disabled, and the ASEL pin level of the device is used to determine the bus
interface. The SV92A3/SV92A35 device family is packaged in a 16-pin TSSOP
(thin shrink small-outline package).
LSI SV92A35V2 – HDA/AC97 integrated modem digital chip using the MDC 1.5
specification and a DAA CSP1040 V2.
Complies with MDC 1.5 specification. The modem measures 27mm X 35mm
and.3 mated height single sided board.
RJ11 connect via a 2 pin fly-wire from modem to RJ11 connector
Digital line protection, call progress monitoring via on-board piezo device.
Page 23