Account Number Recording - Toshiba PERCEPTIONe&ex User Manual

PERCEPTION
e&ex
To Record a Verifiable Account
Code During a Call (Incoming or
Outgoing) and/or After a Call
Is Completed:
1. Ask your party to wait, then
flash the hookswitch.
2. Dial the CRG access code.
3. Dial the 1- ~ 12-digit account
code (determined in the
DMDR Program).
4. Flash the hookswitch.
5. Resume your conversation.
1. Lift the handset.
2. Dial the CRG access code.
3. Dial the 1- ~ 12-digit account
code (determined in the
DMDR Program).
4. Hang up.
This procedure applies when a station user forgets to enter an account
code before a call. The account code can still be entered during a call, or
after the call is completed, provided it is done prior to the station user
hanging up and before the ACT timer expires.
At any time before disconnect ...
You will hear recall dial tone, and your connection will be placed on hold.
You will hear recall dial tone.
The system will store the account code to output to SMDR. You will hear
recall dial tone.
Upon completion of call, the system sets the ACT timer automatically.
Before the timer expires ...
You will hear dial tone.
The account code is set, the SMDR is printed out, and the line locks out.
You will hear dial tone.

ACCOUNT NUMBER RECORDING

Your system automatically records the details of some or all of the calls
you make to or receive from outside the system. Recorded calls may be
assigned account numbers for billing purposes (1 ~ 12 digits).
STANDARD TELEPHONE
19