Call Waiting - Toshiba PERCEPTIONe&ex User Manual

PERCEPTION
e&ex
2. Flash the hookswitch.
3. Dial the desired number.
4. When the called party
answers, announce the call.
5. Hang up to transfer the call.
To Accept the Waiting Call and
Terminate the Existing Call:
1. Hang up.
2. Answer the call.
To Accept the Waiting Call While
Holding the Existing Call:
1. Flash the hookswitch.
2. Dial # 4.
To Return to the Original Call:
1. Flash the hookswitch.
The original connection will be placed on hold, and you will hear recall
dial tone.
You will be connected to the called party.
NOTES:
1. If you hear a busy tone after dialing the station number or trunk
access code, flash the hookswitch once to return to the original call.
2. To return to the original call after accessing a trunk, flash the
hookswitch twice.
The call will be transferred.

CALL WAITING

If you are involved in a call and the attendant has an outside call waiting
for you, you will be alerted of the call by two short warning tones. At this
point, you have three choices:
1. Ignore the call; it will return to the attendant.
2. Terminate your existing call and accept the new call.
3. Hold the existing call and accept the new call. In this mode, it is
possible to alternate between the two calls until the conversations
are terminated.
Your telephone will ring in the normal manner.
You will hear recall dial tone, and the original call will be placed on hold.
You will be connected to the waiting call.
The new call will be placed on hold.
STANDARD TELEPHONE
13