STANDARD TELEPHONE
5. Dial #.
To Use Speed Dial-System:
1. Lift the handset.
2. Dial
#
6.
3. Dial the Speed Dial-System
address code (10 ~ 99).
To Store or Change a Telephone
Number:
1. Notify the attendant of your
request.
To Activate Automatic Callback:
1. Flash the hookswitch.
2. Dial
*
7.
4
You will hear recall dial tone, and the number will be stored.
NOTES:
1. A Speed Dial-Station directory may be shared by several stations.
However, only one station (designated as the controller) can store or
change numbers.
2. Record each speed dial code and its corresponding telephone
number for future reference.
SPEED DIAL-SYSTEM
As many as 90 telephone numbers can be stored in your Speed Dial-
System directory.
You will hear dial tone.
The system will dial the stored number.
The Speed Dial-System directory is controlled by the attendant console,
or through the TTY in the programming.
CALL FUNCTIONS
AUTOMATIC CALLBACK
If you attempt to call another station or access a trunk and receive a busy
tone, you can request to be signaled when the desired station or trunk is
idle. You may continue to use your telephone in the usual manner while
awaiting a callback.
You will hear recall dial tone.
You will hear dial tone.
PERCEPTION
e&ex