Table of Contents
Advertisement
STANDARD TELEPHONE
To Page the Expanded Internal
Paging Group:
1. Lift the handset.
2A. Dial the Expanded Internal
Paging access code
(1 5
... or ...
2B. To page the Expanded Internal
Paging Group in addition to all
the External Paging Zones,
dial___. (Programmed in
DSYS).
3. Announce your page.
4. Hang up when your page is
complete.
To Answer a Meet-me Page:
1. Lift the handset (at any tele-
phone).
2. Dial the access code.
16
You will hear dial tone.
You are now connected to the expanded internal page group.
2).
You are now connected to the expanded internal page group and all
external page zones.
Speak slowly and distinctly, and repeat your message.
Your page will be terminated.
MEET-ME PAGE
This feature will automatically connect you to a call that has been
"parked" for you by the operator. If you are away from your telephone,
the operator may park the call and direct you, via the page system, to
dial an access code.
You will hear dial tone.
You will immediately be connected to the caller.
MESSAGE WAITING
This feature allows the attendant or other Message Center to inform a
station user that there is a message waiting. There are two signaling
possibilities:
1. If your station is equipped with a Message Waiting light, it will flash
on and off.
2. If your station is not equipped with a Message Waiting light, then it
will receive a double ring every 20 minutes (when Message Waiting
has been set by either the attendant console or an electronic
PERCEPTION
e&ex
Advertisement
Table of Contents
