Table of Contents
Advertisement
PERCEPTION
e&ex
3. Hang up and wait for callback,
or dial another number.
To Answer Automatic Callback:
1. Lift the handset.
To Cancel Automatic Callback:
1. Lift the handset.
2. Dial
* *
7.
To Call Forward All Calls:
1. Lift the handset.
2. Dial
*
9.
When the desired connection becomes idle, your telephone will ring in
short bursts. You must pick up the call within six seconds, or your
request will be canceled.
If the called party is a trunk, you will hear outside dial tone.
NOTE: If the call was made using Least Cost Routing, then the called
number will be dialed automatically.
If the called party is a station, that station will ring and you will hear
ringback tone. If you hear an overflow tone, this indicates that the station
or trunk that you called has previously been called by another party.
Hang up and wait to be called again.
You will hear dial tone.
Callback will be canceled.
CALL FORWARDING
Call Forwarding enables you to direct your station's incoming calls to
another station. There are four types of call forwarding available:
I Call Forward All Calls.
I Call Forward Busy.
I Call Forward No Answer.
I Call Forward Busy/No Answer.
In addition, there are two types of Call Forwarding that apply to calls for
DID, TIE, and CCSA trunks. When the following Call Forwarding types
are used, calls can be routed only to the attendant:
I Call Forward Busy (System).
I Call Forward Busy/No Answer (System).
You will hear dial tone.
You will hear recall dial tone.
STANDARD TELEPHONE
5
Advertisement
Table of Contents
