Turning The Power Off - Sharp XV-Z12000 Operation Manual

Turning the Power off

1
Press on the remote control
or on the projector, then
press or
confirmation message is dis-
played, to put the projector into
the standby mode.
Note
• If you accidentally pressed
do not want to put the projector into
the standby mode, wait until the
confirmation message disappears.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
ENTER button
again while the
and
STANDBY
button
MENU
button
", ', \, |
buttons
-37