Panic Mode; Valet Mode - Clarion UNGO Pro Security S670 Owner's Manual

➜

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your remote. Just press
for 1.5 seconds, and you will enter Panic Mode. The siren
will sound and the parking lights will flash for the programmed
siren duration.
, ,
The LCD 2-way remote will beep (or vibrate) continuously
when the system enters panic mode. The 2-way remote will not
generate a page notification when panic mode is exited.
➜

valet mode

You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote, but all
convenience functions (door locks, trunk release, etc.) will
continue to work normally. You can access Valet Mode either
manually or with the remote.
To enter or exit Valet Mode manually:
The status LED will light solidly if you are entering Valet Mode,
22
To stop Panic Mode at any time, press
or .
1. Turn the ignition on.
DRW-35
button within 10 seconds.
2. Turn the ignition off.
3. Press and release the Valet
© 2006 directed electronics, inc.