Panic Mode; Override Mode - Clarion Ungo Pro Security SR1000 Owner's Manual

panic mode

If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your remote. Just press
onds, and you will enter panic mode. The siren will sound and the park-
ing lights will flash for the programmed siren duration. To stop panic
mode at any time, press

override mode

You can prevent your security system from automatically arming and
triggering by using override mode. This is very useful when washing the
vehicle or having it serviced. In override mode, the security system will
not arm, even with the remote, but all convenience functions (door
locks, trunk release, etc.) will continue to work normally.
To enter or exit override mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Override switch
within 10 seconds.
The status LED will light solidly if you are entering override mode, and
it will go out if you are exiting override mode.
To enter or exit override mode using the remote:
1. Open any vehicle door.
2. Press
3. Press
.
on the remote again.
.
.
for two sec-
DRW-35
15