Override Mode; Panic Mode - Clarion Ungo Pro Security RK1 Owner's Manual

Clarion corporation of america owner's guide switch model rk1
Hide thumbs Also See for Ungo Pro Security RK1:
Table of Contents

Advertisement

override mode

You can prevent your system from automatically activating the Starter
Kill and locking the doors by using override mode. This is very useful
when washing the vehicle or having it serviced. In override mode, the
starter kill cannot be activated, even with the remote, but all conve-
nience functions (door locks, remote engine start, etc.) will continue to
work normally.
To enter or exit override mode:
1.
2.
3.
switch within 10 seconds.
The status LED will light continuously if you are entering override mode
and will turn off if you are exiting override mode.

panic mode

If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your remote. Just press
onds to enter panic mode. In panic mode, the horn will honk and the
parking lights will flash for 30 seconds. To stop panic mode at any
time, press
, or
N N O O T T E E : : In order for panic mode to be effective, the vehicle's horn (or
optional siren) as well as the vehicle's parking lights must be
connected.
10
Turn the ignition on.
Turn the ignition off.
Press and release the Override
on the remote.
DRW-35
for 1.5 sec-

Advertisement

Table of Contents
loading

Table of Contents